无码无套少妇毛多18pxxxx,日韩欧美一区二区福利视频,17c视频在线观看,中文字幕久久久久久妻,日本黄色精品专区网站

When the thermal insulation and decoration integrated package is installed by the adhesive anchor (or adhesive hanging) process, its practical height should not be greater than 40m, and a special design should be carried out, and its durability needs to comply with relevant regulations and design requirements. When mechanical anchors are used to anchor the EPS board, the anchors should be installed at least 24 hours after bonding. On the concrete wall, use an impact drill to drill holes inward on the surface of the EPS board. The diameter of the hole depends on the anchor bolt, and the depth of entry into the wall is not less than 35mm. The thermal insulation and decoration integrated materials are industry-leading and have good performance. The insulation layer uses the third-generation insulation material polyurethane, which is an insulation product with low thermal conductivity, excellent density, tensile strength, compressive strength, water absorption, fire resistance and other physical properties.

The service life of the thermal insulation and decoration integrated project is not less than 25 years, and there is a lack of corresponding durability and weather resistance test data support. The exterior wall insulation system does not have a data model of stress, strain, deformation and change trend of each structural layer and material performance over time. When choosing decoration materials, we often look at the quality of the materials, especially the service life. This is because our economic conditions were not very good before, and most of the materials we used were practical.

So when the thermal insulation and decoration integration encounters problems with the basic wall, should we deal with this first? Will this affect the efficiency of our construction? When using it, the effect may not be ideal, or it may not be durable. So if we want to choose an external wall thermal insulation and decoration integrated board, we must see what raw materials the manufacturer uses when producing it, so as to reduce the choice of problematic boards.

The thermal insulation and decoration integration uses anchoring, node and cold bridge design processing methods to effectively reduce energy-saving losses, and make construction more convenient in areas such as the Northeast and Northwest that have higher requirements for thermal insulation systems, and also reduce the budget to a certain extent.